Copper Lead Out Wire
February 5, 2025
3 Pack Fence Warning Sign
February 5, 2025
Neutral Plate Connector
$16.99
Neutral Plate Connectors are used to connect different types of metal without creating electrolysis. Can be used with any combo of steel, aluminum, stainless, copper, etc. Place one type of metal above neutral plate and place the other below, then screw on nut.
Neutral Plate Connectors are used to connect different types of metal without creating electrolysis. Can be used with any combo of steel, aluminum, stainless, copper, etc. Place one type of metal above neutral plate and place the other below, then screw on nut.
Cashmans Neutral Plate Connector
- 1 per pack
- Easy to install
- Use when mixing two different types of metal
| Weight | 1 lbs |
|---|---|
| Dimensions | 1 × 4 × 6 in |
Related products
-
6” x 9’ Cylinder Post
$25.99Cashmans 6″ x 9′ posts are made of Southern Yellow Pine and pressure treated to a .40 retention. You can purchase these post individually or in a bundle of 21 (buy a bundle or more and save 50 cents per post). These posts are perfectly straight and the same diameter on each end.
-
4” x 4” Sheep and Goat Wire 330’
$379.99Class 3 Fencing (2.5 times more galvanization than class 1)
48″ tall
4″ x 4″ square openings
12.5 gauge
-
6 ½’ T-Post – 1.25 Green
$7.99Cashmans metal T-Posts are available in 6 1/2′ only. Easy to drive into the ground with a T-Post Pounder (also available at Cashmans) or some might use a sledge hammer. Attached anchor plate makes sure your t-post gets a good hold and stays in the ground. T-posts can come in handy for lots of projects but, make sure you are aware of the dangers. T-posts can be sharp and dangerous for animals if not properly placed or covered. T-Post toppers can protect your animals from the sharp top of a t-post and t-posts should be placed on the outside of your fence away from the animals reach.
